Here you will find answers to Drag and Drop questions
Question 1
Drag each item to its proper location
Place the BGP attributes in the correct order used for determining a route.
Answer:
Question 2
Place the BGP commands to the proper locations
Answer:
+ show ip bgp: path selection values
+ show ip bgp summary: Memory usage
+ show ip route bgp: AD of BGP
+ show ip bgp neighbor: Notification, update…
Other questions:
Below are other Drag & Drop Questions as Willdo commented in the “Share your ROUTE Experience”:
4. IPv4 to IPv6 Transition Methods
-.-.-.-.-.-.-.-.-.-.-.-.-.–.-.-.-.-.-.-.-.
Chose 4 from below:
NAT-PT
6 to 4 tunnels
GRE tunnels
Route tagging
IPsec tunnels
ISATAP tunnels
//……Answers….//
-------------> NAT-PT
-------------> 6 to 4 tunnels
-------------> GRE tunnels
-------------> ISATAP tunnels
-.-.-.-.-.-.-.-.-.-.-.-.-.-.
2. BGP Attributes
-.-.-.-.-.-.-.-.-.-.-.-.-.-
* Weight- ..not advertised to other routers…
* Local Preference- …Propagated through autonomous system.
* MED- …Propagated between autonomous system.
-.-.-.-.-.-.-.-.-.-.-.-.-.-.
3. BGP Attributes
-.-.-.-.-.-.-.-.-.-.-.-.-.-
Put them in the right order
Answer:
1st = Weight
2nd = Local Pref
3rd = Originate Route
4th = AS Path
5th = MED
****************show bgp command and related information**************
1.Show ip bgp a. path selection values
2.Show ip bgp summary b. Notification, update…
3.Show ip route bgp c. AD of BGP
4.Show ip bgp neighbor d. Memory usage
****************show eigrp command and related information**************
1.Show ip eigrp neighbor a. Sources of routes information
2.Show ip eigrp topology b. What being learned
3.Show ip route eigrp c. What actually being used
4.Show ip interface eigrp d. Verify eigrp information for each network
-.-.-.-.-.-.-.-.-.-.-.-.-.-.
5) LSA Corresponding area type
-.-.-.-.-.-.-.-.-.-.-.-.-.-
Stub<---------------------LSA 1,2,3
NSSA<-------------------LSA 1,2,3,7
Backbone or transit<------LSA 1,2,3,4,5
totally NSSA<------------LSA 1,2,7
totally stubby<-----------LSA 1,2
